Rack Mounted / Desktop Effects, Preamps, Processors and Compressors.

Intelligent digital graphic equaliser with peak stop plus limiting. Two channels of EQ from 20 to 20K w/ box
Regular price $250.00

The White Instruments Model 4320 is a 27-band passive, cut-only equalizer designed for professional audio use. Each band provides attenuation only, with no active boost.

Rackmount design, suited to corrective and subtractive EQ tasks in studio, broadcast, or sound-reinforcement applications.

Modded to be active line level interface with a output gain control. Comes with PSU that powers both units.
Regular price $999.00

4-way power supply for 9.5 inch Golden Age Project devices with 24 V AC / 500 mA. With DC cables.
Regular price $140.00

The Universal Audio LA-610 MkII combines the legendary warmth of the 610 tube preamp with the smooth, musical compression of the LA-2A-style T4 opto-compressor. Handcrafted in the USA, this all-in-one channel strip delivers vintage analog character with modern enhancements, making it an essential tool for professional and project studios alike.


Regular price $2,499.00

Half Rack Sonic Maximiser released in 1997 - PRISTINE Condition!
Designed to compensate for the common inadequacies of conventional loudspeakers; to overcome is the inherent envelope distortion that's caused by any filtering process.
Signals of different frequencies are delayed by different amounts as they pass through a filter, and so the timing relationships of the fundamental frequencies and harmonics are altered. It is claimed that this can be perceived as a loss of 'integrity' in the audio quality — sounds taking on a muddy or smeared character.
The BBE 262's signal processing splits the audio signal into three bands: 20Hz‑150Hz, 150Hz‑1200Hz, and 1200Hz‑20kHz. The lowest band is delayed by about 2.5ms through the action of a passive low‑pass filter. The middle band is delayed by about 0.5ms through an active band‑pass filter (thereby causing high fundamentals or low harmonics to exit the unit before the lowest fundamentals). The highest band is not delayed at all; it's processed by a voltage‑controlled amplifier whose gain is determined by the average loudness of both the middle and high bands, so that the high‑frequency harmonic content can be 'optimised'. In the case of the 262, all this signal processing is performed within a single dual‑channel integrated circuit.
w/box, manual and 12VAC PSU.
Regular price $300.00

As used by THE EDGE! This is an original 1980’s Unit (not the Modern Digital stompbox reissue). 240 Volt Unit - Digital Delay with patch save/recall, EQ, Filters, and Modulation! Just serviced by Tim Lovell.
Regular price $1,000.00

Battery Powered Multi Effects/amp modeling unit. Clips on your belt
Regular price $150.00

Rack unit with preamp, optical compressor and “Meequalizer” EQ controls.
Regular price $480.00

31 Band Stereo EQ! Dual Rack Size. 240 or 100 Volt operation (plug wired for 240V Aus). Some faders are a bit scratchy but should come good with cleaning.
Regular price $300.00

SPACE ECHO! Classic vintage tape echo machine. Made in Japan.
100 volt version, requires step-down transformer (not included).
Just had tape section refurbished with new tape and rollers.

Regular price $2,899.00

SPACE ECHO! Classic vintage tape echo machine. Made in Japan.
100 volt version, requires step-down transformer (not included).
Just had tape section refurbished with new tape and rollers.
The face has a distinctive golden hew due to years of honest, hard working cigarette smoke!
Regular price $2,850.00

Vintage 1970’s Made in Japan - True Tape echo! 100 Volt Version - Requires Use of Step Down Transformer.
Regular price $1,000.00