Made in Japan 2000-2001 - FujiGen Prestige Line.
Mahogany Body with 3 Piece maple Ultra neck. Compound Profile; C shape toward headstock and flat D profile toward the heel.
24 Fret 25.5 inch Scale Neck with Rosewood fingerboard. 17 inch radius.
Ibanez V7 and V8 Humbuckers with 5 way switch for Coil Splitting options.
Double Lo Pro Edge (Licensed Floyd Rose) Tremolo.
Also features L.R. Baggs Piezo pickups on each saddle, wired through an active preamp. The Piezo and Magnetic pickups can be accessed via two output jacks; the push button switch will either allow both pickups to be accessed through a single jack (but not simultaneously; depends on the mini toggle switch position) OR for the mag/piezo output to be split across either jack as a stereo output, (there is no factory blend option from combined mono through a single output, but mods are possible).
This example is in very good condition; minimal/negligible fret wear and cosmetic damage is limited to the edges of the body.
It plays like butter, has a very low action and is super comfy.
A fourth trem spring has been added to compensate for 10-46 string gauge (originally shipped with 3 springs and 9-42 gauge strings).
The back cavities were previously painted with copper paint but this is purely superficial. The only changes present are two replacement control knobs, and the absence of 2 cavity covers (the battery cover is a DIY replacement).
No trem arm included but comes with the trem block cap/plate and allen keys.
Mahogany Body with 3 Piece maple Ultra neck. Compound Profile; C shape toward headstock and flat D profile toward the heel.
24 Fret 25.5 inch Scale Neck with Rosewood fingerboard. 17 inch radius.
Ibanez V7 and V8 Humbuckers with 5 way switch for Coil Splitting options.
Double Lo Pro Edge (Licensed Floyd Rose) Tremolo.
Also features L.R. Baggs Piezo pickups on each saddle, wired through an active preamp. The Piezo and Magnetic pickups can be accessed via two output jacks; the push button switch will either allow both pickups to be accessed through a single jack (but not simultaneously; depends on the mini toggle switch position) OR for the mag/piezo output to be split across either jack as a stereo output, (there is no factory blend option from combined mono through a single output, but mods are possible).
This example is in very good condition; minimal/negligible fret wear and cosmetic damage is limited to the edges of the body.
It plays like butter, has a very low action and is super comfy.
A fourth trem spring has been added to compensate for 10-46 string gauge (originally shipped with 3 springs and 9-42 gauge strings).
The back cavities were previously painted with copper paint but this is purely superficial. The only changes present are two replacement control knobs, and the absence of 2 cavity covers (the battery cover is a DIY replacement).
No trem arm included but comes with the trem block cap/plate and allen keys.